If you’re looking for step by step instructions on hp deskjet plus 4155 wi fi setup, then you’ve come to the right place. In this article, we’ll show you how to get your printer connected to your wireless network in no time.
How to Set Up the HP Deskjet Plus 4155 Wi-Fi
Assuming you have already unboxed your printer:
1. Plug in the power cord to the back of the printer, then into an outlet.
2. Turn on the printer by pressing the power button on the front.
3. Wait for the printer to finish its start-up sequence. This may take a minute or two.
4. On your computer or mobile device, find the list of available Wi-Fi networks and look for a network name that starts with HP-Print-.
5. Connect to the HP-Print-XX network.
6. Once you’re connected, open a browser and type 123.hp.com/setup into the URL field.
7. Follow the on-screen instructions to finish setting up your printer.
How to Connect the HP Deskjet Plus 4155 to Wi-Fi
If your HP Deskjet Plus 4155 printer is not already connected to a wireless network, you will need to do so before you can print wirelessly. Here’s how to connect the HP Deskjet Plus 4155 to Wi-Fi:
1. Make sure that your router is turned on and connected to the internet.
2. On the printer control panel, touch the Wireless icon.
3. Touch the Settings icon, then touch Wireless Setup Wizard.
4. Follow the on-screen instructions to select your network and enter the password.
5. Once the printer is connected to the network, you can begin printing wirelessly.
How to Install the HP Deskjet Plus 4155 Driver
Assuming you have already downloaded the driver for the HP Deskjet Plus 4155 printer, here are the steps to install it:
1. Connect the printer to your computer using a USB cable.
2. Turn on the printer.
3. On your computer, open the downloaded file and follow the on-screen instructions to install the driver.
4. Once the installation is complete, restart your computer.
How to Use the HP Deskjet Plus 4155
To use the HP Deskjet Plus 4155 printer, first make sure that it is properly connected to a power source and your computer. Once it is turned on, load paper into the input tray. To print, open the document or image you want to print and click the “Print” button. A print dialog box will appear. Select the HP Deskjet Plus 4155 from the list of printers and click “OK.” The document or image will begin printing.
How to Troubleshoot the HP Deskjet Plus 4155
If your HP Deskjet Plus 4155 is not working properly, there are a few things you can do to troubleshoot the issue.
First, check to make sure that the printer is properly connected to your computer. If the printer is not connected, or is not connected properly, it will not be able to print.
Next, check the printer’s ink levels. If the ink levels are low, the printer may not be able to print properly.
Finally, if the printer is still not working properly, you may need to contact HP customer support for assistance.
How to Reset the HP Deskjet Plus 4155
If you’re looking to reset your HP Deskjet Plus 4155, there are a few things you’ll need to do. First, you’ll need to find the reset button. This is usually located on the back of the printer. Once you’ve found the reset button, you’ll need to press and hold it for a few seconds. After a few seconds have passed, you should see a message on the printer’s display that says “Resetting printer.” Once you see this message, you can release the reset button. After the printer has been reset, you should be able to use it as normal.
How to Clean the HP Deskjet Plus 4155
To clean your HP Deskjet Plus 4155 printer, follow these steps:
1. Turn on the printer and open the ink cartridge access door.
2. Use a soft, damp cloth to gently wipe any ink residue from the ink cartridges, contact points, and carriage.
3. Close the ink cartridge access door.
4. On the control panel, touch the Setup icon ().
5. Touch Tools, and then touch Clean the Printhead.
6. When prompted, touch Start. The printer cleans the printhead and prints an alignment page.
How to Maintain the HP Deskjet Plus 4155
Assuming you would like tips on how to maintain the HP Deskjet Plus 4155:
To keep your HP Deskjet Plus 4155 running smoothly, here are a few maintenance tips:
1. Keep the printer clean – over time, dust and debris can build up on the printer, especially around the paper feed area. Use a soft, dry cloth to gently wipe down the machine on a regular basis.
2. Check for jammed paper – from time to time, paper can get jammed in the printer. Be sure to check for any jams and clear them out as needed.
3. Use genuine HP ink cartridges – using non-genuine ink cartridges can cause issues with the printer. To avoid any problems, be sure to use only genuine HP ink cartridges.
By following these simple tips, you can help keep your HP Deskjet Plus 4155 running smoothly for many years to come.